If the care label does not specify a temperature, wash using the cold setting. This means that programme cycles and durations programme, the drum continues to turn can vary. Repair work to electrical appliances should only be carried out by a suitably qualified person in strict accordance with current local and national safety regulations.
The machine is delivered with the display brightness on setting 5.
Changing the programme sequence cancelling a programme changing a programme you can cancel a programme at any after the start of a programme it is no time after it has started. Page 7 this equipment may only be used when: page 8 warning and safety instructions turn off the stopcock if the textiles which have been machine is to be left for any length pre-treated in solvent based of time e. A special descaling agent is available to order from the miele spare parts department or via the internet on miele novotronic w 1514 инструкция. Subsequent water intake for the main wash is through compartment j.
Over time, detergent residue can build up in the water jets in the top of the detergent drawer housing.
If the water the miele water protection system level exceeds a certain level, the protects the washing machine from drain pump switches in and pumps water damage. You can also choose whether you want the display to go out 10 minutes after a programme has started or to remain visible throughout the programme. There is a lever behind the detergent caution: turn the impeller by hand to check that it rotates freely.
There are two volumes: this will change as soon as a different setting is chosen. Note for test institutes: en test programme short programme for test institutes; the short extra option must be selected. During the first 8 minutes the washing machine measures how much water is being absorbed by the laundry and uses this to calculate the load.